-
Q How Should Polyester Lifting Slings Be Stored and Maintained?
A Store lifting slings in a clean, dry location away from direct sunlight, excessive heat, chemicals, and other sources of damage, following the manufacturer's instructions. Keep slings away from sharp edges and avoid dragging them across abrasive surfaces. Clean them only using approved methods, and inspect them before returning them to service. Slings with damage or uncertain service history should not be reused until properly assessed.
-
Q How Should Lifting Slings Be Inspected Before Use?
A Inspect the sling before each use according to the manufacturer's instructions and applicable safety requirements. Look for cuts, tears, damaged stitching, abrasion, heat damage, chemical deterioration, exposed load-bearing fibers, damaged fittings, or an unreadable identification label. Remove damaged or suspect slings from service and have them assessed by a qualified person. Never use a sling if its condition or rated capacity cannot be verified.
-
Q Can Webbing Slings Be Used to Lift Delicate or Finished Products?
A Webbing slings can be suitable for lifting many finished products because their relatively broad, flexible surface can help reduce localized contact pressure. However, suitability depends on the load's edges, surface finish, weight, and lifting arrangement. Sharp edges may cut or damage the webbing, so appropriate edge protection may be required. Always verify the sling's condition and the manufacturer's usage instructions before lifting.
-
Q How Does the Sling Angle Affect Lifting Capacity?
A In a multi-leg lifting arrangement, sling angle affects the tension carried by each leg. As the sling legs become more horizontal, the tension in each leg generally increases for the same supported load. The permitted capacity depends on the sling assembly, leg count, angle, and applicable rating system. Consult the manufacturer's load charts or a qualified lifting professional before selecting a multi-leg sling arrangement.
-
Q What Is the Difference Between Vertical, Choker, and Basket Hitch Lifting?
A A vertical hitch lifts a load using a single sling leg in a direct connection. A choker hitch passes the sling around the load and tightens under tension, while a basket hitch supports the load in a loop beneath it. Each method has different capacity considerations, and the rated capacity depends on the sling design, hitch arrangement, and lifting geometry. Use the manufacturer's guidance for the specific sling and hitch configuration.
